Innokin Zenith Pro Clearomizer for sale
Building on their previous successes, renowned reviewers Phil Busardo and Dimitri Agrafiotis have returned to work to design the Zenith Pro clearomizer. It pushes the boundaries of excellence to offer you a model full of innovations and new features. A true marvel that truly deserves its “Pro” designation.
The Zenith Pro, however, remains faithful to what made its predecessors world-renowned. It remains as simple to use as ever, regardless of the vaper’s level, while offering exemplary flavor restitution. The Zenith Pro clearomizer, however, gains in versatility thanks to an airflow ring that varies from very tight to more airy. Enough to adapt to a large number of vaping styles. It is also more imposing, which allows it to carry up to 5 ml of e-liquid which will easily find its place in the tank thanks to its new filling system.
Pairing the Innokin Zenith Pro with an Aegis Solo 100W
Zenith Pro: bigger, more professional!
The Zenith Pro clearomizer may surprise you at first glance with its size. While it practically retains the same base diameter as the Zenith (24.5 mm), it thickens at the tank to reach a diameter of 25 mm. It also has a removable ring above the airflow that is close to 27 mm. But that’s not all! Its height increases by 3 mm to reach 55 mm. Nothing too extravagant, but it’s enough to give the Zenith Pro a more imposing look.
Its sleek lines and beautiful finishes give an impression of quality and robustness. There’s no doubt about it, this is a Zenith Pro! To complete this beautiful picture, Innokin had the good idea of equipping its new clearomizer with a more modern 510 drip tip. Another drip tip is also provided for fans of very tight draws.
Another bonus is a “beauty ring” that comes with the Zenith Pro clearomizer to change its look. Stainless Steel with the blue and Gunmetal versions, Red for the black version, Blue for the Stainless Steel version.
Zenith Pro: the master of versatility!
Up to date, the Zenith Pro isn’t limited to a single type of indirect inhalation vape. More open and airy, it has a “Restricted Direct Lung” (RDL) airflow. Very trendy, this larger opening offers more vapor and sensations. This setting is highly recommended with the Z-Coil 1.0 ohm resistance which can be used up to 25 watts!
A filling that is always so simple
Innokin understands that filling can quickly become a chore for vapers. The manufacturer has therefore always made sure that its clearomizers are easier to fill. This is the case with this Zenith Pro, which transforms this mandatory step into a real pleasure! The sliding top cap has been redesigned to offer a wider and deeper opening. All bottle tips will fit inside without any problem.
The Zenith Pro clearomizer’s tank can hold up to 5.5 ml of e-liquid. To minimize the risk of leaks, the clearomizer features a handy little trick. The top cap opening for filling coincides with the sliding of the chimney, which allows the e-liquid inlets to be blocked. Very clever and, above all, very effective!
Filling the Zenith Pro:
- Turn the top cap to the right following the direction indicated by the arrows
- Filling the Zenith Pro tank
- Turn the top cap to the left to close it
- If this is the first filling, wait 10 minutes for the resistance to be well soaked
Zenith Pro resistors
Innokin has taken advantage of the release of its Zenith Pro to unveil two new coils. The clearomizer comes with a 1.2 ohm coil dedicated to indirect inhalation and flavors, and a 1.0 ohm coil intended for use with a more airy draw for better vapor production.
- Z Coil 1.0 ohm: for direct inhalation, use between 20w and 25w
- Z Coil 1.2 ohms: for indirect inhalation, to be used between 10w and 14w
These two resistors have the particularity of having wider openings, which allows them to be compatible with e liquids with a higher vegetable glycerin rate (without exceeding 70%). Of course, the Zenith Pro remains compatible with all the Z Coil resistors of the Zenith and Zlide, which multiplies the possibilities offered by the clearomizer.
Finally, it should be noted that the Zenith Pro clearomizer makes changing the resistance easier thanks to a piston system that pushes the resistance back once the base is removed. You will no longer have to use your nails to remove the resistance, it will come directly to you!
Changing the resistance of the Zenith Pro:
- Unscrew the base of the clearomizer
- Remove the used resistor by pulling it towards you
- Clip on a new resistor
- Screw the base of the clearomizer back on.
- After filling, wait 10 minutes for the resistance to be well soaked
Features of the Innokin Zenith Pro Clearomizer:
| Dimensions | 55 x 24.5 mm | Capacity | 5.5 ml |
|---|---|---|---|
| Materials | Steel / glass | Resistances | Zenith Innokin |
The Zenith Pro is manufactured by Innokin.
The Zenith Pro comes with:
- 1 Zenith Pro Tank
- 1 resistor 1.2 ohms
- 1 resistor 1.0 ohm
- 1 beauty ring
- 1 additional drip tip
- 1 notice
Reviews
There are no reviews yet.